Signamax 10/100 Industrial DIN-rail Mount Power over Ethern Bedienungsanleitung PDF herunterladen (Seite 6)

Hardened PoE Ethernet Switch

Functional Description

• Meets IEC61000-6-2 EMC Generic Standard Immunity

for industrial environment.

• Supports IEEE802.3af Power over Ethernet (PoE)

Power Sourcing Equipment (PSE).

• Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:

10/100Mbps, Full/Half-duplex, Auto-Negotiation, Auto

MDI/MDIX.

• 100Base-FX: Multi/Single mode SC or ST type, WDM

Single mode SC type.

• Supports 1024 MAC addresses. Provides 1M bits buffer

memory.

• Alarms for power and port link failure by relay output.

• Power Supplies: Redundant 48VDC Terminal Block

power inputs 100-240VAC external power supply.

• Operating voltage and Max. current consumption: 1.5A

@ 48VDC. Power consumption: 72W Max.

• -40 to 75 (℃℃-40℉ to 167℉) operating temperature

range. Tested for functional operation @ -40 to 85 ℃℃

(-40℉ to 185℉).

• Supports DIN-Rail, Panel, or Rack Mounting

installation.

Assembly, Startup, and Dismantling

• Assembly: Place the switch on the DIN rail from above

using the slot. Push the front of the switch toward the

mounting surface until it audibly snaps into place.

• Startup: Connect the supply voltage to start up the

switch via the terminal block.

• Dismantling: Pull out the lower edge and then remove

the switch from the DIN rail.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Keine Kommentare

Signamax 10/100 Industrial DIN-rail Mount Power over Ethern Bedienungsanleitung Seite 6