Signamax 7-Port 10/100 Unmanaged Switch + 1-Port 100BaseFX Bedienungsanleitung PDF herunterladen (Seite 5)

Signamax







065-7111F series Compact Fiber Access Switch

User’s Manual 3

Introduction

The Signamax 065-7111F series Compact Fiber Access Switch is an 8-port

Ethernet switch, integrating 10/100BaseTX (100BaseFX) networks in a

cost-effective compact size package. The TX ports can auto sense speed

and half/full duplex modes and auto-MDIX.

Product Features

 7-port for 10/100BaseTX and 1-port for 100BaseFX.

 The TX ports auto negotiate for 10/100Mbps speed, auto detect full/half

duplex mode, and auto-MDIX.

 Choices of SC, ST, MT-RJ, VF-45, or LC connectors for FX ports.

 Broadcast storming filter function.

 True non-blocking architecture.

 Full wire-speed forwarding rate.

 Store-and-forward mechanism.

 Back pressure and IEEE802.3x compliant flow control.

 Supports 2K MAC addresses.

 Supports 1M bits buffer memory.

 Front panel power and port status LEDs.

 Compact size.

Front Panel

The front panel of the switch has eight ports and an array of LED indicators to

provide you with instant feedback on the status of the switch.

LEDs

The array of LED indicators on the front panel conveys status and

configuration information to help you monitor and troubleshoot the switch.

Figure 1: Front & rear panels

 Power This LED comes on when the switch is connected to the power.





 Port Status Each port has a LED, indicating the port status.

 Power Adapter Connect the supplied AC power cord to the receptacle

on the back of the switch, then plug the cord into a standard AC outlet with a

voltage range from 100 to 240 VAC.

1 2 3 4 5 6 7 8

Keine Kommentare

Signamax 7-Port 10/100 Unmanaged Switch + 1-Port 100BaseFX Bedienungsanleitung Seite 5